3D Printing Resin Platinum LCD Series - Solid - Resin Pack
Free AU Shipping
For Members only
$406.75Formfutura Platinum LCD Series is a general-purpose photopolymer LCD resin that is specifically developed to work with all open source LCD and DLP 3D printers in the range of 385 - 420nm. Our Platinum LCD resin is almost odorless and 3D prints with extremely high accuracy and a very smooth surface finish. The Platinum LCD Resin series is developed to 3D print with relatively short curing times.
Key features
- Almost no odour - Compared to other resins on the market our Platinum LCD resin is relatively odour-free!
- UV weather resistant
- Fast printing with short curing times
- High-resolution 3D printing with fine detail
-
Vivid colors with an extremely high level of colorfastness
- Truly opaque and translucent colors available
- No discoloration and/or yellowing
- Excellentdimensional accuracy and low shrinkage
- Low water absorption
- Compatible with all open source LCD and DLP in the range of 385 - 420nm
The Platinum LCD Series - Solid - Resin Pack contains theSolid Black,Solid White,Solid Light Greyresins ( 500g each)
Applications
- Figurines and models
- Functional prototyping
- End-use products
Resin properties (uncured liquid)
- Viscosity: 500 cps at 25C
- Density: 1.18 g/cm2
Mechanical properties
Test method on post cured objects through 10 minutes high power mercury curing.
| Properties | Typical Value | Test Method |
|---|---|---|
| Glass transition temperature (Tg) | 51C | ASTM D7028 |
| Water absorption | 0.4% | ASTM D570-98 |
| Impact strength (IZOD notched) | 18 J/m | ASTM D256A |
| Tensile strength | 45 MPa | ASTM D638M |
| Tensile Modulus | 1000 MPa | ASTM D638M |
| Elongation at break | 8% | ASTM D638M |
| Flexural Strength | 66 MPa | ASTM D790M |
| Flexural Modulus | 1800 MPa | ASTM D2240 |
| Shore D Hardness | 82 | ASTM D2240 |
Please note that the above-displayed values can vary with individual machine processing, post-curing parts, geometry, print orientation, print settings, and temperature.
Preparation(s) before starting to print
- Shake the bottle for at least 2 minutes before each use.
-
After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
- The resin can be poured back from the vat into the bottle once your print is finished
- Always use protective measurements like safety glasses and nitrile gloves when handling resins.
General printing guidelines
Base Curing Times at 50 micron
- Translucent Black: 12sec
- Translucent Aquamarine: 10sec
- Translucent Blue: 12sec
- Translucent Red: 11sec
- Solid White: 12sec
- Solid Black: 14sec
- Solid Light Grey: 13sec
Post-processing
-
We do advise you to post-process your 3D print in order to achieve the material properties
- Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
-
An ultrasonic cleaner is preferred/recommended
- Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
-
Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
- Cure your object in a high power curing chamber for approximately 20-30 minutes at 65 C
- The preferred curing wavelength is between 300-410nm
Safety
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
- Always wear Respiratory Protection when sanding/cutting the resin object.
- Always use nitrile gloves when handling resins and uncured resin objects.
Product export information
| HS Code: 2916140090 | Description:Resin for 3D Printing | Country of origin:the Netherlands |
What is Aussie Rewards:
Aussie Reward is Loyalty Program for Loyal Customers of HR-Sports.com.au Introducing Aussie Coins as a Aussie Rewards, the loyalty program designed exclusively for our loyal customers at HR-Sports.com.au. With Aussie Coins, you can earn rewards for every purchase you make and enjoy further discounts on your future orders. Here's how you can accumulate and utilise Aussie Coins to maximise your savings:
What is the Joining Cost:
Aussie Rewards Program offered by HR Sports is free to join. This can be a valuable benefit for joining the rewards program Sign UP Now.
How to check my Aussie Coins Balance:
To view and redeem your earned Aussie Coins, follow these steps:
- a) Create an account and log into your HR-Sports.com.au account.
- b) Go to the "My Account" section.
- c) View your reward point details, including the order number, earned points, and used points.
- d) To redeem points, add items to your cart, proceed to checkout, and specify the number of points (in dollars) you wish to redeem for that order from your current points balance.
Current Bonus Program:
- You will get 3x points for every $ you spent with HR-Sports.com.au (Limited Period offer)
- Subscribe to our newsletter to get updated with ongoing and upcoming Aussie Rewards bonus offers
Reward Points Terms & Conditions:
- For every dollar spent, you earn 1 reward point.
- Points can be redeemed once you accumulate a total of 100 points.
- Every 100 points can be redeemed for $1 to spend on our website.
- Periodic offers may provide opportunities to earn additional reward points.
- Reward points cannot be exchanged for cash, withdrawn to a bank account, or transferred to other accounts. They can only be used on our online store.
- Subscribe to our newsletter to stay updated on deals, promotions, and regular reward points opportunities.
Subscribe to HR-Sports.com.au today to start earning Aussie Coins and enjoy the benefits of our loyalty program. Earn rewards, save money, and stay informed about the latest deals. Thank you for being a loyal customer!
Be The First To Review This Product!
Help other HR-Sports users shop smarter by writing reviews for products you have purchased.
